Energy performance of electrical and electronic products more and more ordinary concerns of consume

Qiaolei ice cream maker game see the world the Nine
In Australia, the EMC requirements for electrical products by the ACA (Australian Communications Authority) monitoring. In addition to the standard used in Australia and New Zealand ice cream maker game Standard (AS / NZS) outside, ACA last year and admitted 103 other standards, these standards include EN (European Norm), IEC (International Electrotechical Commission) ice cream maker game and CISPR (International Special Committee on Radio Interference ).
In order to limit the influence of electromagnetic interference, Australia from 1 January 1999 onwards, all within the limits prescribed in the standard product of electromagnetic ice cream maker game interference (EMI) mandatory. ice cream maker game EMC also some experimental projects must fulfill the mandatory requirements, they are: conduction disturbances, intermittent interference (the click), radio frequency radiation interference; remaining EMC test items do not make mandatory requirements, such as interference, electrostatic discharge (ESD), harmonic wave, voltage flicker. Upon examination ice cream maker game products comply with the relevant standards, can be labeled C-Tick mark. Any company or individual to use this flag must make an application to the competent government departments to obtain written approval before use, and mark the height of not less than 3 mm.
EMC product grade Australian EMC system is divided into three levels, vendors in the sales level two, level three products, you must register in the ACA, apply for C-Tick mark. Level of a product is the use of wireless devices interfering with lower radiation spectrum of products, such as manual switches, relays simple, one-way squirrel-cage induction motors, resistors and so on. On the level of a product, the supplier must provide signed declaration of conformity and product ice cream maker game description sheet. Level of a product may voluntarily apply for C-Tick mark, but vendors ice cream maker game choose to use the mark, declaration of conformity and in the provision of products described in the book, while also providing compliance records to prove that statement as described in the product has been comply ice cream maker game with the relevant ice cream maker game EMC standards. Test site is not required, allowing the internal testing. ice cream maker game Level two products is the use of wireless devices interfering with higher radiation spectrum of products, such as switching power supplies, ice cream maker game welding, dimmers, most household appliances. Suppliers ice cream maker game must sign the declaration ice cream maker game of conformity in addition to providing products ice cream maker game and described in the book, but also to provide the relevant standard test report, if there is no standard, you will need to provide ice cream maker game technical construction file, test sites not a requirement, allowing internal testing. Level 3 product is the use of wireless devices interfering with high radiation spectrum of products, namely CIPR11 with CISPR22 covered products. Currently, the communication terminal products are still included ice cream maker game in this range, but from November 7, 2003, the end product will be divided into level two products. ice cream maker game Suppliers must sign the declaration of conformity in addition to providing products and described in the book, but also to provide by accredited test report issued ice cream maker game by the agency. But also issued by a QMS certification body of quality management system ice cream maker game certificate.
Australia EMC requirements for one control unit: ACA (Australian Communications Authority) FC7 safety and electromagnetic compatibility net two, Authorized Inspection Unit: NATA accredited laboratory or MRA with Australia has the certification system (such as NVLAP) recognized laboratory three , General Requirements 1. Australia controlled by EMC / EMI framework with the European Union EMC CE-Marking of roughly similar, were collected self-certification methods: by product standards and pass a test to sign a declaration of conformity can be. The difference is that declaration must be signed by the importer in Australia or the supplier or manufacturer signed declaration; ice cream maker game another Australian government still requires each local suppliers in Australia or importer must log in to their execution units ACA 2 where electronic Motor products are in the column ice cream maker game tube range, similar to the European Union CE requirements. 3. Supplier for C-tick ice cream maker game log on without holding test reports, in principle, testing and C-tick log can be parallelized. 4 complies with the EMC product before the sale is necessary to affix the label pestle: C-tick mark & Supplier ID; Supplier ID labeling method, there are four, choose one you can: a) Supplier Code Number issued by the ACA ; b) Australian Company Number (ACN); c) Registered Name and Address of Supplier; d) Australian Registered ice cream maker game Trademark. Tags scaled up or down according to the naked eye to see clearly the principle; But Supplier ID font is not available less than 3mm. Marked with the location of the best models label, if the space is not enough, be considered on the manual, warranty or packaging on. 5 If a product ice cream maker game with the same EMC & SAFETY heading of the column tube, its flag can apply for RCM. RCM as New Zealand and Australia shared a voluntary mark, as long as you can apply for certification to a national marketing two countries; registrant shall be the territory of Australia and New Zealand manufacturer or importer, or distributor, respectively, according to AS / NZS 4417.1 and AS / NZS 4417.3 to Standards Australia and the ACA two institutions Sign filing. 6 Once the ACA asked to see the TCF, the agency shall, within 10 working days delivery ACA. V. Penalties - detention or confiscation product; - or fines, penalties generally about U.S. $ 10,000 per person, the company is approximately U.S. $ 0.2 million Australian international standards (StandardsAustraliaIntern ice cream maker game ationalLimited) is Australia's only standard certification bodies. The agency was established in 1922, when the name of the Commonwealth of Australia Engineering ice cream maker game Standards Association, ice cream maker game in 1929 renamed the Australian Standards Association. As the business continues to develop, in 1990 added Quality Certification Services ice cream maker game Limited (QualityAssuranceServices PtyLtd). In 1999, the agency completely abandon the nature of the association, to form the company ice cream maker game registered so far. Australian international ice cream maker game standards is a relatively neutral government and users. 1988 It is with the federal government signed a memorandum of understanding clearly its independence and authority in Australia. The company is headquartered in Sydney, with offices in the states, there are more than 500 employees, and in India, Indonesia and New Zealand branches. In Australia, whether imported or locally assembled electrical products, before entering the Australian market, first through Australian international standards certification. Different electrical products do different product quality certification. All electrical products are done safety certification (SAA). Inspection bodies through destructive testing on electrical appliances, check the electrical safety and reliability, such as high temperatures, uninterrupted use of electrical overload, check the electrical safety performance. ice cream maker game To make the appearance of the washing machine leak test to check for leakage. Electrical sockets for non-normal ice cream maker game use, to see if there are hidden dangers and more. Enter the Australian market of electrical products must comply with local safety regulations, that are often faced with SAA certification industry. As the Australian and New Zealand mutual recognition agreement, all certified products made in Australia, can smoothly enter New Zealand market. SAA logo are mainly two types of form recognition, one is the standard sign. Form of certification is only responsible for the sample, and the standard logo is required to review each of the factory. Currently SAA certification application in two ways, one is through the CB test report, if there is no CB test report, you can also apply directly. ice cream maker game
1, the control class appliances: Control class appliances must be made mandatory by the monitoring department issued a certificate (certificateofapproval), and provides identification (must be marked with a certificate). It should be noted that the certification process and not only for the safety or quality of performance, unless related to security. Certificate, the first letter of the certificate issued ice cream maker game by a state or region. Such as: Q91610 (Queensland) W2015 (WesternAustralia Western ice cream maker game Australia) N10422 (NewSouthWales New South Wales) 2, non-regulated type electrical appliances: non-regulated products, while not mandatory to obtain ice cream maker game certification, but its safety by the vendor / manufacturer is responsible, may voluntarily apply for certification. Control department ice cream maker game will meet the standard ice cream maker game requirements of the product issued certificate of conformity (CertificateofSuitability). Obtain the certificate of conformity of electrical products can be marked with a certificate, the certificate is good the last letter ice cream maker game of the certificate issued by a state or region, such as: CS/431 / Q (Queensland) CS/108/N (New South Wales) RCM flags: Australia and New Zealand are being introduced ice cream maker game RCM logo (RegulatoryComplianceMark), in order to achieve electrical products, unified identity, the flag of Australia and New Zealand is a trademark owned by regulatory agencies, indicates compliance ice cream maker game with safety regulations and EMC requirements, non-mandatory. Before ice cream maker game a product safety certification and electromagnetic compatibility registration, issuing safety certification by regulatory authorities or "RCMRegistrar" (StandardsAustralia) apply to use RCM logo. SAIGLOBAL logo: by SAI (original SAI) issued by the product safety signs, the signs non-mandatory, and requires factory inspection and so on. Energy consumption of household electrical requirements apply to the following: refrigerator and freezer (testing standards: AS/NZS44741.1, AS/NZS4474.2) washing machine (testing standards: AS/NZS2040.1, AS/NZS2040.2) dryers (testing standards: AS/NZS2442.1, AS/NZS2442.2) Dishwasher (test standards: ice cream maker game AS/NZS2007.1, AS/NZS2007.2) one-way domestic air-conditioning (testing standards: AS/NZS3823.1.1, AS / NZS3823.1.2, AS/NZS3823.2, AS/NZS3823.3) The applicant must submit an application to the monitoring agency with complete and accurate test reports and energy labeling samples. Test reports must be issued by an accredited laboratory, within three years from the effective date of issue
December 1, 2008 (Australia), April 1, 2009 (New Zealand) all future into or manufactured in the above regions AC-AC and AC-DC external ice cream maker game power supplies. In load and no-load state are required to meet minimum energy efficiency standards (MEPS). (Note: In the above power produced prior to the implementation date still allowed ice cream maker game to continue to sell) Applicable range: External ice cream maker game Power External Power Supply (EPS), AC-AC or AC-DC, input voltage contains 230VAC, single output but also in extra-low voltage (ELV: 50VAC or 60VDC) range, the output does not exceed 250W or 250VA.
Energy performance of electrical and electronic products more and more ordinary concerns of consumers around the world, with electrical and electronic products for the energy consumption required to do authentication. EST Certification Center has recently launched a MEPS certification for the Australian market. The Australian Government's energy requirements, including labeling and minimum energy consumption standards (MEPS) ice cream maker game in two ways. All sold in Australia following electronic products, sales must be accompanied by mandatory energy labels: * Refrigerator with icemaker * Washer * Dryer * Dishwasher * Air Conditioning (single phase mandatory, three-phase voluntary)
The following products are also need to follow the minimum energy standards (MEPS) the basis for management and control - which require their minimum energy level: * Refrigerator with ice maker (October 1, 1999 implementation date, revised January 2005 1 May) * Main pressure storage heaters (October 1, 1999 implementation date) * small primary pressure storage heaters (<80L) and low-pressure hot-swappable (October 1, 2005 implementation date) (reference AGO the limits and test methods) * Three-phase motor (0.73 kilowatts to <185 kW) (October 1, 2001 implementation date, amendments to April 2006) * Single-phase air-conditioning (October 1, 2004 onwards execution, were revised in 2006, 2007 and April 1, 2008) * Cooling power up to 65 kW three-phase air-conditioning ice cream maker game (October 1, 2001 implementation date, modified on 1 October 2007) * Town straight tube fluorescent lamps converter (from 1 March2003). attention except to MEPS, ballasts also need to mark the efficiency index (EEI). * straight tube fluorescent lamps - contain 550 to 1500 mm and the lighting power greater than 16 watts (October 1, 2004 implementation date) * Distribution Transformers - 11 kV and 22 kV class 10 kA to 2.5 MVA (October 1, 2004 implementation date) * Commercial refrigerated cabinets (self-contained and remote control ice cream maker game system) (2004 October 1 implementation date) the following products, though we have not yet included in the compulsory administration directory, but in the near future must also comply with energy consumption norms and obtain certification, some of which have been identified implementation date * External power supply (2008 10 January execution); * STB (October 1, 2008 implementation date); * TV; * home entertainment devices: (audio and video equipment) (October 1, 2008 implementation date); * hot and cold water dispenser ; * Vending Machine; * commercial ice machine; * Tube Series
Shenzhen World Target Detection Ltd "WSCT" is to provide professional ETL certification, CCC certification, CE certification, ice cream maker game FCC certification, FDA